Gas Installation Service in Biggleswade

Our gas installation service in Biggleswade covers cookers, hobs, gas pipework, leak detection and gas safety certificates. All work is done by Gas Safe registered engineers, quoted free and available 24 hours for leaks.

A gas cooker has to be connected with the right hose, bayonet fitting and stability bracket, then tested for tightness. We disconnect the old one, fit the new one and check it burns correctly. Delivery drivers cannot do this legally. See the gas cooker installation page.

Gas hobs sit in the worktop, so the cut out, the gas supply and the clearances all have to be right before it goes in. We fit new hobs, replace old ones and check the flame picture on every burner. More on the gas hob installation page.

Landlords in Biggleswade need a gas safety certificate every year for every rented property. We check each appliance, flue and the tightness of the installation, then issue the CP12 record the same day. See the gas safety certificates page for what gets tested.

New gas pipework is needed when you add an appliance, move the kitchen or bring a supply to a garage or outbuilding. We size the pipe for the load so appliances get the pressure they need. Full details on the gas pipe installation page.

Old steel gas pipe corrodes from the outside in, and undersized runs starve newer appliances. We replace tired pipework in copper, test the new run and leave it properly clipped and labelled. See the gas pipe replacement page for how we work.

If you smell gas, turn the supply off at the meter, open the windows and get everyone outside before calling. We trace and repair gas leaks 24 hours a day across Biggleswade. Read the emergency steps on the gas leak detection and repair page.

Our reviews

About us

Every gas job we do is carried out by a Gas Safe registered engineer, which is the legal minimum for working on gas in the UK. Over 20 years we have fitted cookers and hobs, run new supplies, replaced failing pipework and issued certificates for landlords and agents. Gas leaks are treated as emergencies at any hour.

  • Gas Safe registered engineers

  • 20 years working in Biggleswade

  • Free quotes on every job

  • 24 hour emergency call outs

  • Up to 10 year boiler warranty

Frequently Asked Questions

Who is allowed to fit a gas appliance in Biggleswade?

Only a Gas Safe registered engineer can legally install or work on a gas appliance in a UK home. That includes cookers, hobs, fires and boilers. Retail delivery teams are not allowed to connect them. Ask for the engineer's Gas Safe card and check the number on the register.

What should I do if I smell gas at home?

Turn the gas off at the meter control handle, open doors and windows, and do not touch light switches or anything electrical. Get everyone outside, then ring the national gas emergency line on 0800 111 999. Once the supply is safe, call us and we will trace and repair the fault.

How long does a gas safety certificate take?

For a normal home with a boiler, a hob and a fire, allow about an hour. We test each appliance, check the flues and carry out a tightness test on the installation, then issue the certificate the same day. Access to the meter and every appliance keeps it quick.

t: 07843 114508

Opening hours

Mon: Open 24 hours

Tue: Open 24 hours

Wed: Open 24 hours

Thu: Open 24 hours

Fri: Open 24 hours

Sat: Open 24 hours

Sun: Open 24 hours

© Copyright 2026. DS Plumbing and Heating. All rights reserved.

Address: 28 Mersey Road, Biggleswade, SG18 8NQ